*The vacuum-mop will update its firmware to fix bugs or improve functions for better security and user experience.
You can check whether the firmware is latest version on the settings page in Mi Home/Xiaomi Home app and select the firmware update method in settings. For the Firmware Upgrade and Support Policy, please visit Xiaomi Security Center (https://trust.mi.com/misrc/updates/iot?tab=update) for more details.
*Holds 60 binloads of dust: In tests carried out in a 100m² household environment on a robot vacuum cleaning twice a day before returning to the base station for dust collection, the dust bag waste volume was measured every four days and the dust bag was filled ≥60 times without emptying.
*17000Pa: A fan performance test bench was used to repeatedly measure the maximum suction pressure of the motor with a 220V power supply. Measured results were greater than 17000Pa.
*10s: Dust collection time of 10s measured using a stopwatch with a precision of 0.01s.
*2-hour hot drying: At normal room temperature, in the hot drying phase of the product self-cleaning cycle, it took 2 hours for pads to achieve complete dryness.
*Millimetre-level sensor precision: In tests, industrial grade reflectors of various reflectivity were placed on high-precision moving rails with a sliding rail movement accuracy of 0.05mm and a range of 0–500mm. Starting at the centreline of the product bumping plate (0cm), line laser measurement precision at different distances in 50mm movements resulted in millimetre-level precision with a deviation of ± 5mm within 500mm. Detectable obstacles depend on environmental conditions and usage scenarios. Obstacle identification and avoidance effectiveness will depend on the actual usage scenario.
*180rpm: Run for 3 minutes using infra-red tachometer test method, stabilised at 180rpm.
*Pressure mopping: Compared with the Xiaomi Robot Vacuum 1C, when pressure tested the Xiaomi Robot Vacuum X10+ with its dual pads produced greater ground pressure than the Xiaomi Robot Vacuum 1C.
*5 times the cleaning power: Compared with the Xiaomi Robot Vacuum-Mop 2, the cleaning power is 5 times greater. Actual usage may vary depending on conditions of use.
*4000Pa: At full charge, using a vacuum tester with range 0–20kPa and accuracy 0.01Pa to test vacuum in the fan inlet with continuous operation for 3 minutes, power suction setting after stabilisation ≥ 4000Pa.
*2-hour battery life: The robot vacuum was fully charged, set to standard cleaning mode and run in a 4 x 5m open space. Test outcomes achieved more than 120 minutes of battery life.
*All function displays on this page are for illustrative purposes and may differ from the actual product.
*Unless otherwise specified, all comparative data referred to on this page is sourced from products in the Xiaomi Robot Vacuum series. No other brands are involved.
*The data on this page was provided by Dreame Laboratory unless otherwise specified.