The voice you desire.35 dB smart noise cancellation* | Dual device connection | Wireless charging | Long battery life of up to 28 hours

*Xiaomi and Redmi mobile phones are designed solely to support the AI-powered adaptive noise cancellation feature. Compatible models will be released gradually. Due to the necessity of implementing this feature, users need to upgrade their phone's operating system to the latest version of MIUI.*

• 35 decibels of active noise cancellation with 3 adjustable settings available.
• Quick delivery. Utilize it for up to three hours after a ten-minute charge.
• Smart dual-device connectivity compatible with various systems.
• Wireless charging starts when the case is in range.
• The decision of the intelligent environment. Modulates the intensity of adaptive noise reduction.
• The dual transparency setting enables you to converse freely while wearing earphones.*
• 9 mm composite vibration membrane file recorded by Xiaomi's internal audio lab.
• 28 hours of total operating time. Up to 28 hours of listening with the charging case.

*Only Xiaomi and Redmi mobile phones are designed to support the AI-based adaptive noise cancellation feature. Compatible models will be released in succession. Due to the necessity of using this feature, users need to upgrade their phone's operating system to the latest version of MIUI.**Only Xiaomi and Redmi phones are designed to support the switch under dual transparency mode. Compatible models will be released gradually. To use this feature, users need to upgrade their phone's operating system to the latest version of MIUI.**Pressing and holding either earbud only allows for switching between deep noise cancellation mode and transparency mode by default. Only Xiaomi and Redmi phones running the latest MIUI version can adjust the settings for adaptive noise cancellation, with 3 noise cancellation modes, 2 transparency modes, and voice control for alarms and finding earbuds. Compatible models: Mi 11, Mi 11 Lite, POCO X3 GT, POCO F3.* *Only Xiaomi and Redmi phones with the latest MIUI version support the MIUI Pop-up feature for quick pairing. Compatible models: Mi 11 Ultra, Mi 11, Mi 11 Lite, Redmi Note 10 Pro, Redmi Note 10S, Redmi Note 10 5G, Mi 10T, POCO F3, POCO X3 GT, Mi 10 Pro, Mi 10.* *For some third-party media applications, audio may play through the speaker, or the switching process may fail when toggling between operations using a connection to two devices.*

Leading hybrid active noise cancellation system.

35 dB deep noise cancellation * allowing you to enjoy a world with less background noise.The earbuds use advanced dual active noise cancellation technology with feedback and feedforward microphones. They effectively eliminate surrounding noise and reduce excess noise in the ear canal. The level of noise cancellation can reach up to 35dB*.*Noise cancellation has been activated through active noise cancellation technology. It supports a noise cancellation depth of up to 35dB, which can reduce background noise by as much as 98%. Test data was provided by the National Measurement Institute in China. Actual results may vary depending on the size of the user's ears, the chosen earbuds, ear canal structure, how the earbuds are worn, whether the user is chewing or exercising, and more.*

Deep noise cancellationThe metro, the airplaneWhen traveling by subway or airplane, it effectively cancels out the noise of engines and other vibrations within the vehicle/cabin, making your journey quiet and comfortable.

Balanced noise cancellationCafés, gardensWhen taking a break at a café, the surrounding noise is effectively canceled out, allowing you to enjoy peaceful afternoon moments.

Light noise cancellationLibraries, officesIn relatively quiet environments like libraries and offices, they reduce ambient noise, allowing you to enjoy some time for yourself.

Adaptive noise cancellation

The rule of the intelligent scene knows your ears better.The AI algorithm controls the scene based on the ambient noise level and usage habits. Adjust the depth of noise cancellation according to different environments.*Only Xiaomi and Realme phones are designed to support the adaptive noise cancellation feature powered by artificial intelligence. Compatible models will be released gradually. Due to the implementation of this feature, users need to upgrade their phone's operating system to the latest version of MIUI.*Adaptive noise cancellation feature: Connect the earbuds and wear them in your left and right ears. In the MIUI settings, go to the noise cancellation mode and manually select the adaptive mode from within the app.

Noise cancellation during calls using three microphones can be clearly heard in noisy environments.The three microphones, along with the noise cancellation algorithm activated by the neural network model, can accurately capture people's voices while effectively reducing background noise. This enables clear conversations without any interference in noisy environments.

Feedback microphoneMicrophone of the conversationDirectional microphone

Dual Transparency Mode* Listen to the surrounding sounds without having to remove your earbuds.When you activate transparency mode, you can hear ambient sounds without needing to remove your headphones. Switch to sound enhancement mode for clearer audio. You can have a comfortable conversation with your friend while wearing the earbuds.

TransparencyEnhancing the sound

The default setting is transparency mode. You can select the "Enhance Sound Mode" option in the appropriate version of MIUI for the specific model.

A composite vibrating membrane with a diameter of 9 mm recovers more sound details.The 9 mm diaphragm membrane provides you with an excellent audio experience. After being fine-tuned by a professional from Xiaomi's internal sound lab, the high frequencies are clear and undistorted, while the low frequencies are rich and pure, offering a more refined sound quality.

Exceptional battery life of up to 28 hours* Keep enjoying your music.With an integrated low-power chip, the earbuds can operate for up to 6 hours* on a single charge. With the help of the charging case, the earbuds can last for up to 28 hours*. Thus, you can enjoy music for long hours.

6Hours

Individual use (with noise cancellation feature turned off)

28Hours

Total battery life (with noise cancellation turned off)

*Battery Life Test Conditions: Earbuds battery level at 100%, volume set to 50%, Bluetooth codec set to AAC, and both Active Noise Cancellation and Transparency Mode turned off in MIUI settings. Test Item: Fully discharge the Redmi Buds 3 Pro while playing audio until one of the earbuds stops functioning. Actual usage hours may vary based on usage conditions, charge level, and environmental factors.*

supportsFast charging

supportsWireless charging

With fast charging, the earbuds can charge for just 10 minutes, allowing you to enjoy music for up to 3 hours. If the battery is running low, take a short break and let it charge. The charging case also supports Qi wireless charging technology, making charging incredibly easy.

Play the music until.3Hours

Charging for 10 minutes.

The wireless charging pad shown in the picture is not included in the package and must be purchased separately.*Wireless Charging: The wireless charging center is located approximately 8 mm above the Redmi logo on the back of the earbud case. The center must align with the wireless charger’s center for charging to occur. If the charging light is on, it indicates that wireless charging is functioning properly.*

Dual smart device connectivity*

Capable of connecting to two devices simultaneously, with smart switching between entertainment and work.You can connect the same pair of earbuds to two devices across different platforms such as Android, iOS, and Windows simultaneously, allowing you to easily switch between entertainment and work. They pair via Bluetooth by simply opening the case near your phone* or by quickly tapping on the pop-up window*, enabling you to enjoy a new swift connection method.*The ability to connect to two devices is enabled by default. Audio may be played through a speaker for some peripheral media applications, or switching between tasks may fail. If you choose to disable this feature, please connect your Xiaomi and Redmi phones and update your phone's operating system to the latest version of MIUI. Compatible models will be announced gradually.You need to update your phone's operating system to the latest stable version to pair quickly through the pop-up window. Compatible models are being tested and are expected to be completed soon.

Double tap to answer the call.Tap the back of the earbuds to control, including switching modes, pausing and playing music, and more. It also supports voice activation for waking up.

Press twice.Reply / Keep the call music playing / Pause

Press and hold either of the earphones.Noise cancellation / Transparency mode

Press three times.Move on to the next song, end the call.

*The voice control feature must be set up for wake-up in the appropriate version of MIUI for the relevant model. *It can also be activated through gestures that can be configured in the appropriate version of MIUI for the relevant model.*

More details.

The discovery of the presence of earphones.Music can be automatically paused when the earbuds are removed. Playback can resume upon putting them back in.

Water-resistant with an IPX4 rating*Water-resistant from all directions, it protects users from sweat and water splashes.*Water resistance test IPX4. According to the enclosure protection rating standard GB/T 4208-2017, it passed the test conducted by the Suzhou Institute for Product Quality and Supervision. The test report number is WPHE210546. The test results indicated compliance with the GB/T 4208-2017 standard.*

A diverse selection of silicone ear tips is available.It offers three sizes of ear tips, including large, medium, and small, providing a more comfortable user experience.

Find your earphones.Within the Bluetooth range, you can locate your earbuds by sound.

*You can also locate your earbuds through the sound emitted, according to the applicable MIUI version for the appropriate model. The earbuds do not support the sound emission function when placed in the charging case. According to data from Xiaomi's internal laboratories, when searching for your earbuds through sound within a close range, the distance between the phone and the earbuds should be within 10 meters in a quiet and accessible environment, and the phone and earbuds should be connected via Bluetooth. Actual distances may vary depending on environmental conditions.**Make sure that the charging port is free of liquids and foreign objects before charging.**The images related to the functions of the earphones on this page are for illustrative purposes only. Product specifications are for reference only. Some product specifications may vary due to external factors such as environmental conditions and differences in mobile systems. Please refer to the actual product for details.**Pressing and holding either earbud allows you to switch between deep noise cancellation mode and transparency mode by default. Only Xiaomi and Redmi phones running the latest MIUI versions can modify settings for adaptive noise cancellation, with 3 noise cancellation modes, 2 transparency modes, voice activation control, and locating your earbuds. Compatible models: Mi 11, Mi 11 Lite, POCO X3 GT, POCO F3.* *Only Xiaomi and Redmi phones running the latest MIUI versions support the MIUI Pop-up feature for quick pairing. Compatible models: Mi 11 Ultra, Mi 11, Mi 11 Lite, Redmi Note 10 Pro, Redmi Note 10S, Redmi Note 10 5G, Mi 10T, POCO F3, POCO X3 GT, Mi 10 Pro, Mi 10.* *For some third-party media applications, audio may play through the speaker, or switching may fail when transitioning between operations using a dual device connection.*