Xiaomi 12V Max Brushless Cordless DrillHigh-performance brushless motor paired with a lithium battery

30 Newton-meters of powerful torque|30-speed precise control

3 operating modes |Smart Display

Easily customizable speed and torque

Low-impact slow-stop

Use a single tool for drilling and screwing.

Type-C charging port

Provided with an adapter that meets local standards.

Smart displayNew interactive experienceEnhancing traditional tool concepts by providing a high-resolution display that shows the current operating mode and manual gear speed in real-time, putting control at your fingertips.

Automatic mode

Screw-in/ out

Manual mode

Manual gear setting

Pulse mode

Battery level

Switch between three modes with a single key.Encounter a range of operational situationsEasily change operating modes by tapping the button on the display's bottom. From beginners to professionals, catering to various groups in different scenarios with a single click, accommodating both casual and renovation needs.

Automatic Smart Mode

M Manual Mode

Pulse Mode

M Manual Mode

30-stage gear adjustment with precision360° infinite knob with 30 gear stages allows for precise incremental adjustments or rapid changes through gears. The maximum torque or speed can be separately controlled based on drilling/screwing mode, catering to the advanced requirements of professional users for precision and accuracy.

Drilling Mode30-speed incrementally adjustable maximum speed

Screwdriving Mode30 incremental torque output adjustments for speed.

A Automatic SmartMode

Effortless automatic torque detection without any issues.The integrated smart chip adjusts torque based on the application. Once tightening is complete, the screwdriving mode locks automatically to prevent damage from over-tightening.

Safe pulseMode

Effortless management of intermittent starting and stoppingThe safe-pulse mode, equipped with an intelligent speed control chip, is ideal for beginners. The intermittent rotation start/stop feature promotes safe operation and minimizes damage to soft materials.

Drilling SpeedTime

* The figure displays speed fluctuations.

Appropriate for a range of materialsOptimizing various operational scenarios and a diverse set of applicationsEffortlessly screw/drill into soft pine, hard beech, aluminum tubes, steel plates, and plastics like water pipes and acrylic.* Not recommended for concrete surfaces

Non-load-bearing walls

Wooden furniture

Wood

Acrylic plates

PVC pipes

Aluminum alloy extrusions

Modes for Drilling and ScrewdrivingVersatile Functions & Seamless TransitionSwitch effortlessly between drilling and screwdriving modes with a simple push and twist. The all-metal variable speed gearbox caters to various speeds for different applications.

Continuous gear shiftingGradually slow down before coming to a complete stop for improved safety.The trigger is infinitely adjustable, with speed increasing gradually based on the applied force. The slow-stop feature in high torque mode ensures user safety.

Sleek screw-free designAn updated version of classic tool designThe Xiaomi screwdrivers feature a minimalist design with sleek lines and hidden screws on the surface. The ergonomic grip is tailored for comfortable and safe use.

Advanced surface treatmentsOptimized for enhanced grip comfort.The metal coating and UV topcoat produce a premium matte metallic finish that is resistant to scratches and stains. The device is constructed from durable PC+ABS high-strength engineering plastic. The front grip is coated with matte TPU soft rubber for a comfortable, non-slip feel, and it resists yellowing and stickiness.

Wireless, compact designHigh storage capacity and extended battery longevity2000mAh high-quality lithium battery built-in, capable of driving 550+ self-tapping screws on a single charge. The unique battery design removes the requirement for extra bulky battery packs.

22+ Penetrating 6mm steel plates successively

280+ Drilling holes consecutively to a depth of 4cm on a wooden board.

Thorough testing to ensure quality assurance

Thorough product safety testing

Resistance to heat and flamesDurabilityAbnormal operationMechanical strengthStructureInternal wiringFasteners and linkagesProtection from exposure to live componentsHeat generation

Safety regulations for battery protection circuit

Protection against overvoltage during chargingOvercurrent charge protectionOverload protectionOvercurrent protection

Screwdriver bit testing

10-hour Neutral Salt Spray (NSS) test for rust resistance.Magnetic test (testing magnetic attraction with an 18mm steel ball)Surface qualityHardness test

RoHS test

RoHS compliant with national standards.TSCATPCHCE RoHSREACH

Safety test

Temporary voltage fluctuations and brief power outagesImmunity testElectrical fast transient/burst (EFT/B) immunity is the ability to withstand sudden electrical disturbances.Surge immunity testESD immunityElectromagnetic field immunity optimizationCE safety CE EMC FCC

Environmental reliability testing

Low-temperature test for 48 hours at -20°C, with normal operation resuming upon returning to room temperature.Operation at high temperatures (2 hours at 40°C)High-temperature test (48 hours at 70°C, followed by normal operation upon returning to room temperature)Operating at low temperatures for 2 hours at -10°C.Continuous temperature and humidity testing (24 hours at 40°C and 93% RH, followed by normal operation upon returning to room temperature)Rapid fluctuations in temperature and humidityThermal shock test: 3 hours at -20°C followed by 3 hours at 60°C for 8 cycles.

Safety tests required for lithium-ion batteries and battery packs

Short-circuit occurring externally at room temperatureShort circuit caused externally at high temperature (55℃).OverchargingForced dischargeLow pressure (equivalent to an altitude of 15,240m for 6 hours)Temperature cycling for 10 cycles, alternating between 6 hours at 72°C and 6 hours at 40°C.VibrationAcceleration impactDropHeavy weight impactSubjecting to thermal stress by heating at a rate of 5°C/min up to 130°CThermal spraying (applying heat to the battery until it burns completely without exploding)Operation conducted at elevated temperaturesCB Scheme test Testing for electromagnetic compatibility (EMC)

* The chart includes only some tests for reference, not all.

Type-C charging port compatible with various devices.Quick charge adapter for charging anytimeEquipped with a 1m Type-C rapid charging cable and adaptor, featuring a universal Type-C charging port for easy charging anytime.

Diverse selection of accessoriesOptimal for a variety of operational needs24 varieties of S2 steel bits across 9 popular categories, hardened up to 60HRC for enhanced toughness and longevity.The 60mm magnetic extension rod is versatile for various uses.Eight various sizes of woodworking bits and metal twist drills are suitable for drilling a diverse array of materials.Wood drill bitsMetal drill bits

Water-resistant storage pouchSleek and minimalist designThe water-repellent storage pouch can accommodate the main unit, accessory case, adapter, and charger, allowing for easy and convenient transportation of all items.

Traditional and modern extension rod designsShipped at randomProduct modifications made from an outside sourceOld designNew designRest assured that this update does not impact the product's quality or usability. Both extension rod designs are authentic accessories when making a purchase.

The maximum torque deviation is ±5Nm because of the measuring device utilized. To conduct the torque test, press the function selection button after fully charging the battery to enter screwing mode. Proceed to use a torque tester to measure the locked-rotor torque at level 30.No-load speed tolerance is around 10%. The speed test involves running the fully charged device for 2 minutes without a load, followed by testing the no-load speed using a speed tester.Testing procedure: Begin by fully charging the device and setting the gearbox to low speed (screwing mode). Switch to manual 'M' mode, adjust the tail torque to 10, and drive an M4 x 25mm self-tapping screw into the pine board until the battery depletes.*Optimization for steel plate drilling test: Ensure the device is fully charged, set the gearbox to high-speed (drilling mode), adjust tail torque to 30 in M mode, and drill a hole into a 6mm-thick steel plate using a 6mm twist drill.Testing method for drilling into a wooden board: Ensure the device is fully charged and set the gearbox to high-speed (drilling mode). Adjust the tail torque to 30 in M mode, then drill a 40mm-deep hole into a white pine board using a 7mm wood bit.The compliance test report for the entire unit was issued by Waltek Services Test Group Ltd. in Foshan with Test Report No.: WTF21F3015226G.The complete ROHS test report was provided by EMTEK (Dongguan) Technology Co., Ltd., with Test Report No.: ED201110010C.The EMC test report was issued by EMTEK (Shenzhen) Co., Ltd., with Test Report No.: ES201110017E.Intertek Shenzhen Ltd. issued the environmental reliability test report with Test Report No. SZHH01513728.The battery test report was conducted by Precise Testing & Certification (Guangdong) Co., Ltd., with Test Report No.: PTC20110204401S-GB01.The screwdriver bit test report, Test Report No. G20201629F, was conducted by the National Light Industry Tool Hardware Quality Supervision & Testing Station in Shanghai. The hardness may vary within a range of ±2HRC.Two different extension rod designs are offered and will be selected at random for shipment.Centre Testing International Co., Ltd. performed a water-repellent fabric test, resulting in a waterproof rating of class 4–5. Test Report No.: A2210085110101C.